Shades cobra head with colored steel cable

Home > Wall Mounted Systems > MINITRACK >

STAS Cobra head with steel cable (for loads up to 22 lbs) 78 3/4" Colored

Shades cobra head with colored steel cable

Shades Steel cable with Cobra head technology.

Alternative Views:

Our Price: $11.40

Product Code: SC102

Color:

Qty:

Description

KIT Contents

Thanks to the patented cobra head design there is no longer any need to feed the cord onto the rail from the end; it can simply be hooked on wherever you choose. Choose your cable color, white or black. The steel cable is 78 3/4" long and is suitable for hanging wall decorations up to 22 lb balance larger frames or distribute the weight of heavier frames by using two cables and two hooks.

Product includes one cable.

Features
Each cable uses braided steel of 1 /16"(1.8mm) in diameter. Each cable length is accurately measured and spliced then soldered at the end to keep the cable from unraveling. We recommend ordering the cables to the length desired or longer than desired and wrapping the excess length together and tucking it under the artwork.

In the event that cutting is necessary follow these easy steps:

1. Measure the desired length.
2. Tightly wind a piece of thin tape around the area to be cut. (Scotch brand 810 transparent tape works well). Make sure that it is placed in the center of the area to be cut.
3. Use a Klein hand cable cutter or similar and cut. Klein is recommended as it cuts in a circular action instead of flattening from pressure above and below the cut.
4. (Optional) Apply solder at the tip. Soldering must be clean and not exceed the diameter of the cable.
5. Remove tape(after optional soldering)

Like this product? Share your experiences using this product. Be the first to write a review »

Browse for more products in the same category as this item: